Documentation
Using Palpable
Your Board's Pages

Your Board's Pages

Every board has its own set of pages. To open them, go to Settings → Devices and tap the board.

On a phone, the board opens on Modules, and the other pages are listed underneath. On a computer, they are in a menu beside the page.

PageWhat it shows
ModulesWhat is plugged into this board right now.
Add-onsWhat this board can run, and what it is running.
SoftwareThe version this board runs, and updates for it.
Wi-FiThe network this board is on, and the ones it can switch to.
HealthHow this board is doing.
ConsoleEvents, readings and logs from this board, as they happen.
ManageRename this board, set up a new card for it, or remove it.

If a module is missing from Modules, see Module troubleshooting.


Add-ons

You switch add-ons on and off for your whole account, in Abilities. This page shows what this board is doing with them. A board loads and unloads add-ons by itself, so the page explains its choices.

At the top, Room shows how much space the board has for add-ons, and how much of it is free.

Below that, add-ons are grouped by what they are doing on this board:

  • Paused: stopped on this board, because there isn't enough room right now or because it ran into an error. The row says which.
  • Running now: running on this board.
  • Resting: not running here, for example because it isn't switched on for your account, or the project doesn't use it.
  • Needs a part: needs something plugged into the board first, like a microphone and a speaker. The board looks for it when it starts.
  • Coming soon: not available yet.

When turning another add-on off would free enough room, a Make room button appears. Tap any add-on to open its page.


Health

Health shows how the board is doing:

  • Memory: how much of the board's memory is in use.
  • Memory, last day: the same, over the last day.
  • Processor: the processor's temperature, in °C.
  • Load: how busy the processor is.

Console

Console is a live feed of what the board is doing: things that happen, sensor readings, and the board's own log messages.

Use the buttons at the top to show All, or only Events, Readings or Logs. To read something without it scrolling away, tap the pause button. Tap it again to carry on.

💡

The Console only works while the board is online. If it stays empty, check that the board shows online first. See Board shows offline.