Documentation
Getting Started
Step 1: Add Your Board

Step 1: Add your board

Setup starts in the Palpable app. The app knows your account and your Wi-Fi, so the board can connect on its own the first time it starts.


Open the Palpable app on your computer

Go to app.palpable.technology (opens in a new tab) on a computer and sign in. If you don't have an account yet, create one. It only takes a few seconds.

Setup needs a desktop browser: copying files to a memory card, or installing over USB, can't happen on a phone.

Add a device

If this is your first board, tap Set up your first board. Otherwise, go to Settings → Devices and choose Add a device.

If the app asks which board you have, pick it from the list. Boards marked "Coming soon" can't be set up yet.

Choose a Wi-Fi network

Pick the network the board should join, or choose Add network and type its name and password. Networks you save are kept under Settings → Wi-Fi, so the next board you add can use them without retyping.

⚠️

The Pi Zero 2 W and ESP32 boards only use 2.4 GHz Wi-Fi.

If your router has separate 2.4 GHz and 5 GHz networks, pick the 2.4 GHz one. It is usually the name that does not end in "5G" or "5GHz". If your router uses one name for both, it usually works; if it doesn't, split them in your router settings.

If you see something else

  • The board won't join your Wi-Fi: what to do
  • The board is on, but it doesn't appear in the app: what to do

Next: