Step 5: Your first project
This is the whole point of Palpable. A project is something you want your hardware to do. You describe it in plain words, and PAL, your AI assistant, builds it.
Start a project
- In the app, choose New project.
- Pick the board it should run on.
- Describe what you want, or pick one of the ideas the app suggests for the modules you have:
"When the temperature goes above 25 degrees, send me a notification."
PAL works out which sensor to use and writes the project's script: the small program that makes it happen. PAL asks you if something isn't clear.
Press Run
A project doesn't start on its own. When you're happy with it, press Run at the top of the project. Press it again to stop.
When the temperature crosses 25°C, you'll get a notification.
Where it runs. On a Raspberry Pi or the UNO Q, the script runs on the board itself and keeps running if the internet drops. On an ESP32 board it needs the connection for now.
Change it
Open the project and tap Ask PAL. Each project has its own chat with PAL, and PAL knows the project's boards and modules. Say what to change:
"Make it 28 degrees instead, and only between 8 AM and 6 PM."
You did it!
Your board is now:
- Connected to your Wi-Fi and your account
- Detecting modules automatically
- Running your first project
Want more ideas? Ask PAL: "What can I make with my modules?" PAL knows exactly which modules you have connected.
If you see something else
- You pressed Run and nothing happens: what to do
- The app says your board "can't reach the things plugged into it" when the project starts: what to do
- A sensor's numbers stopped changing: what to do
What's next?
- Meet PAL: everything PAL can do
- Projects: how projects are organized
- Hardware & Modules: boards, modules and how they connect
- Project Ideas: inspiration for what to build next
- Display Editor: put your own content on a display